
OCTG Pipe Swaging Machine
Prepare OCTG pipe ends for threading with controlled hydraulic forming equipment. The term swaging describes the pipe-end reduction process used by this machine.
Product Overview
Designed for controlled pipe-end reduction before threading, the machine uses hydraulic force and dedicated forming dies. Model selection depends on pipe diameter, steel grade, wall thickness and required swaging length.
Main Advantages
- Pipe-end preparation before OCTG threading
- Five documented models for different outer diameters
- Hydraulic drive with dedicated forming dies
- Optional expansion function, subject to model configuration
PIPE END REDUCING MACHINE
MODEL COMPARISON.
Specifications from the supplied Baoyuan product brochure. Select the appropriate machine based on OD, steel grade, wall thickness and required process.
| Parameter | 180 | 340 | 406 | 508 | 914 |
|---|---|---|---|---|---|
| Pipe OD (mm) | 60.3–177.8 | 60.3–339.7 | 139.7–406 | 245–508 | 340–914 |
| Steel Grade | J55–Q125 | J55–V140 | J55–Q125 | J55–Q125 | X42–X56 |
| Wall Thickness (mm) | 4–15 | 4–18 | 4–18 | 4–18 | 4–12 |
| Swaging Length (mm) | 60 | 60 | 60 | 60 | 400 |
| Reduction Ratio | 5% | 5% | 4% | 3% | 10% |
| Ovality | 0.30 | 0.30 | 0.30 | 0.30 | 1% |
| Cylinder Thrust (t) | 100 | 260 | 400 | 400 | 260 |
| Swaging / Expansion Force (t) | 570 | 1500 | 2300 | 2300 | 1500 |
| Cycle Time (s) | 20 | 20 | 20 | 20 | 40 |
| Rated Pressure | 16 MPa | 16 MPa | 16 MPa | 16 MPa | 16 MPa |
| Machine Weight (t) | 4 | 5 | 7 | 8 | 10 |
| Center Height (mm) | 1200 | 1200 | 1250 | 1300 | 1600 |
Source: supplied Baoyuan swaging machine brochure. All capacities are model-dependent. Final technical configuration and quotations require project confirmation.
CONTROLLED PIPE-END REDUCTION.
A horizontal hydraulic cylinder drives dedicated dies to apply radial compression to the pipe end. The forming operation is selected to meet downstream OCTG threading requirements.
Optional expansion is available on applicable machine configurations. Engineering review is required to confirm die sets, pipe grade and production parameters.
THE EQUIPMENT.
UP CLOSE.




LET’S SPECIFY YOUR
NEXT OCTG MACHINE.
Share your pipe specifications, planned line layout or project requirements. Our team can prepare a technical proposal.
